That pool table you have has been serving your needs for many years. It has finally developed a bit of a worn spot and that last party caused a small rip. This means it is a time to explore your options with a pool table refelting project. There are several decisions to be made and all of them can be exciting.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
When the professionals arrive at your home, you will be able to see what they are doing and ask questions. They will begin by making sure of the measurements. The rails will come off to make it easy to remove the old felt. Old adhesive and staples will be removed and any rough spots will be sanded or prepared otherwise.
That felt piece will be cut to the proper width and length. This will extend past the edge of the slate or bed and allow the staples to hold it onto the surface. A very thin, solid layer of adhesive is applied and the felt is laid over the surface. This is stretched in all dimensions to ensure it is perfectly flat and the staples are applied under the rail location.
Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.
You could patch that rip with a bit of felt or redo the entire surface. Patching a rip can take a few minutes of careful preparation and you can be back at your game of eight ball. You must ensure that the patch does not interfere with the delicate roll of each ball as it passes over this area. This can be accomplished with a small piece of felt, some adhesive, a very sharp knife and a lot of patience.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
The vast majority of pool tables come in a standard green felt. This is fine if you are looking for standard, however, the ability to get other colors might interest you. Some of these others will be purple, blue, red, cream and those with designs on them. Sprucing up your party room can begin with the largest game there.
When the professionals arrive at your home, you will be able to see what they are doing and ask questions. They will begin by making sure of the measurements. The rails will come off to make it easy to remove the old felt. Old adhesive and staples will be removed and any rough spots will be sanded or prepared otherwise.
That felt piece will be cut to the proper width and length. This will extend past the edge of the slate or bed and allow the staples to hold it onto the surface. A very thin, solid layer of adhesive is applied and the felt is laid over the surface. This is stretched in all dimensions to ensure it is perfectly flat and the staples are applied under the rail location.
Rails are then disassembled and covered as well. With weights on the table top and rails reinstalled, a 24 hour curing time will be appropriate. A representative will come back and ensure everything is as it should be. They might even challenge you to a game to make sure.
About Author
0 التعليقات:
Post a Comment